Marley Hawkins Single Camber Clay Machine Made Plain Roof Tile
In stock
Lead time confirmed upon order
Don't just compare product prices
Our low delivery rates mean your total order cost is often less than you'd expect. Check delivery rates on the basket page.
Right product for your project?
Talk to an expert. Call us on 01737 763008.
Want to buy in large quantities?
Call us on 01737 763008 to discuss bulk pricing.
FREE Click & Collect
Simply proceed to the checkout and select one of our stores: Dorking (Surrey), Redhill (Surrey), East Grinstead (Sussex) and Esher (Surrey).
Details
Marley Hawkins Single Camber Clay Machine Made Plain Roof Tile is a pitched roof tile or fitting used as part of the external roof covering, helping shed rainwater and complete the roofline.
It sits over roofing battens and underlay, above the rafters/roof structure. Correct tile type, colour, pitch, headlap, gauge, fixings and compatible ridge/verge/ventilation components must be checked before ordering.
Best for
- New pitched roofs, extensions, repairs and re-roofing projects
- Matching existing tile profiles, colours and roof system components
Key features
- Sits as the outer roof covering, fixed to battens above the roof underlay
- Brand: Eternit
- Material: Clay
- Length: 265mm
- Width: 165mm
- Roof pitch: Minimum Roof Pitch: 30 °
- Minimum roof pitch: 30 °
- Quanity per pallet:1260
- Supplied in bands of 12
- Weight of tiling: 64kg/m² (0.63 kN/m²) at 100mm gauge (roof) (approx) / 56kg/m² (0.55 kN/m²) at 115mm gauge (vertical)
Used with / Compatible with
- Roofing battens, breathable underlay, ridge/hip/verge systems, tile vents, clips, nails and insulation/ventilation strategy
- Use matching fittings and accessories from the same tile/system family where possible
Things to consider before buying
- Check minimum pitch, headlap, gauge and fixing specification for the exact tile
- Colour and finish can vary by batch; matching existing roofs may require checking a sample
- Order compatible fittings such as half tiles, verge tiles, ridge tiles, vents and clips as needed
Technical specification
Batten
- Battens required: 10.0 linear m/m2 at 100mm gauge (roof) (net) / 8.7 linear m/m2 at 115mm gauge (vertical)
- Batten size: 38mm x 25mm for rafters/supports not exceeding 600mm recommended centres (fixed to BS 5534)
- Tile nails: 38mm x 2.65mm
Composition
- Material: Clay
Conformity
- Manufactured to BS EN 1304 under a quality management system meeting the requirements of BS EN ISO 9001
- CE marked in line with the Construction Products Directive achieving a Very Good rating
Coverage
- Covering capacity: 60 tiles/m2 at 100mm gauge (roof) / 53 tiles/m2 at 115mm gauge (vertical)
- Cover width: 165mm (nominal)
Gauge
- Maximum gauge: 100mm (roof) / 115mm (vertical)
Minimum Roof Pitch & Headlap
- Minimum pitch: 30 degrees
- Maximum pitch: 90 degrees
- Minimum headlap: 65mm (roof) / 35mm (vertical)
Pallet Quantity
- Quanity per pallet:1260
- Supplied in bands of 12
Performance
- Tested for resistance to wind driven rain
- Meets the requirements of BS 5534 with respect to wind loading
- Strength and durability: Eternit clay plain tiles do not delaminate and are extremely strong, having a minimum transverse strength of 780N
Tile Size
- Size of tile: 265mm x 165mm
- Tile thickness: 11mm (nominal)
Weight
- Weight of tiling: 64kg/m2 (0.63 kN/m2) at 100mm gauge (roof) (approx.) / 56kg/m2 (0.55 kN/m2) at 115mm gauge (vertical)